How to take care of your motorcycle tyre for long life

Tires are the most important accessory of your bike. Maintaining your tires is important for ensuring safe and efficient vehicle operation. Some basic tire maintenance tasks include: checking tire pressure, inspecting for damage and signs of wear, rotating tires regularly, and having them balanced and aligned. Additionally, it is important to replace tires when they become worn or damaged beyond repair. For example if you own a Duke 250, its tires need an inspection from time to time.

Check tire pressure

Maintaining the correct tire pressure is important for ensuring your vehicle’s safety, handling, and fuel efficiency. Underinflated tires can lead to poor handling, reduced fuel efficiency, and increased tire wear. Conversely, overinflated tires can cause an uncomfortable ride and increase stress on the tires. To check your tire pressure, you can use a tire pressure gauge and compare the readings to the recommended PSI level, usually found on the doorjamb or in the vehicle owner’s manual. You should check your tire pressure a minimum of once a month. In addition, make sure to check tire pressure before long road trips. For example if you own a KTM Duke 200, you should ensure tire pressure before any long ride. 

Rotate tires

Rotating your tires every 6,000 to 8,000 km helps to ensure even wear, which can extend the life of your tires and improve handling. Rotating the position of tires is beneficial for 2-wheelers, 3-wheelers and 4-wheelers. During tire rotation, the tires are moved from one position to another on the vehicle to even out the wear. A common pattern for tire rotation is front to back, cross, or front cross. Rotating your tires according to the manufacturer’s recommendations, which can be found in the vehicle owner’s manual.

Balance and align tires

Regular tire balancing and alignment can prevent uneven wear and improve handling. During tire balancing, the tire’s weight and wheel assembly is measured and corrected to ensure that the tire spins smoothly. Wheel alignment involves adjusting the angle of the tires so that they are perpendicular to the ground and parallel to each other. Misaligned tires can cause uneven wear, reduced fuel efficiency, and poor handling. Therefore, it is recommended to have your tires balanced and aligned every 10,000 to 12,000 miles or as the manufacturer recommends. It is only recommended for the vehicle which has the same dimension of tires at both front and rear. Your bike is really precious, for example ktm duke 125 price is really high, and maintaining the tires will help in the long life span of your bike.  

Avoid overloading and high speeds

Overloading your bike or 4-wheeler and riding at high speeds can put additional stress on your tires and reduce their lifespan. It is important to only overload your vehicle by the maximum load capacity specified by the manufacturer. Additionally, high speeds can generate heat and increase the risk of tire failure. Always drive within the speed limit and avoid aggressive driving. According to the rules, only 2 people are allowed on a bike, and further, in the case of 4-wheelers, there is a certain limit. 

Inspect tires 

Regularly inspecting your tires for any signs of damage, such as cuts, cracks, bulges, or punctures, can help to identify potential problems before they become more serious. If you notice any damage to your tires, have them inspected by a professional and repaired or replaced as needed.

To inspect tires, follow these steps:

  • Check the tire tread depth

Tread is the rubber layer on the tire’s outer surface that touches the ground. The latest tires come with an average tread depth of 8 to 9 millimetres (10/32 to 11/32 inches). The minimum tread depth is 2/32 of an inch.

  • Check for visible damage

Look for cuts, bulges, punctures, and other signs of damage that could cause a tire to fail.

  • Check for uneven wear

Uneven wear can indicate vehicle alignment, suspension, or balance problems.

  • Check the tire sidewalls

Look for cracks, sidewall bulges, or other signs of damage that could cause a tire to fail. Regular tire inspections help ensure your and your passengers’ safety while on the road.

Check tire pressure 

Ensure the tire pressure is at the recommended level, usually found on a sticker inside the driver’s side door or in the vehicle’s owner’s manual.

Avoid rough roads

Driving on rough roads, such as roads with potholes, can cause damage to your tires and reduce their lifespan. If possible, avoid driving on rough roads and slow down when driving over potholes or other obstacles. To avoid bumpy roads, you can plan your route and research the streets you’ll be travelling on. You can also use navigation systems or mapping apps that provide real-time traffic updates, including alerts for road closures or hazards. Additionally, you can stay alert while driving, being mindful of road signs and other indications of rough roads ahead, such as bumps or potholes. And make sure your vehicle is well-maintained, with good tire pressure and suspension, to help absorb some of the impacts from rough roads. If you own a KTM Duke 250, the duke 250 mileage will automatically improve if you follow these steps. 

Use tire protectants 

Tire protectants, such as tire shine or silicone sprays, can help keep your tires in good condition and prevent cracking and fading. These products can also help to protect your tires from the elements, such as UV rays and ozone. Always follow the manufacturer’s instructions when using tire protectants.

Using tire protectants can help prolong the life of your tires and protect them from damage caused by UV rays, ozone, and other environmental factors. Tire protectants are applied to the tire’s surface and form a barrier that helps to prevent cracking, fading, and other forms of deterioration. Some tire protectants also contain agents that help to condition the tire and prevent it from becoming dry and brittle. When choosing a tire protectant, look for one compatible with your tire type that will provide the level of protection you need. Always read and follow the manufacturer’s instructions for the best results. 


If you follow this advice, you can help extend your tires’ life and ensure safe driving. In addition, regular maintenance and care can also prevent unexpected tire problems and help keep you on the road.

Read More : new upcoming bikes in india